| Inspection
Machines - High Speed |
 |
|
|
Salient Features
- Suspended particle and fill volume check.
- Each ampoule is checked twice.
- Cost effective and space saving design.
- Detection by polarized light.
- Built-in validation parameter setting and ease
of product changeover.
- On line data logging.
Operation
Ampoules are loaded on to an inspection table out of
trays. The ampoules are manually pushed on to an inclined
infeed conveyor belt of sufficiently large capacity.
Ampoules are picked up by a starwheel and fed to a revolving
inspection drum consisting of two spinning stations
and two inspection stations. Two ampoules are inspected
at a time at the inspection station 1. Its status is
recorded. The same ampoules are again inspected at the
next inspection station 2. The ampoules then exit the
inspection drum and are picked up by a starwheel and
transfered to a linear screw. A sorter automatically
separates the good and bad ampoules into individual
outfeed hoppers.
|
|
|
Technical
Specifications
|
| Model |
|
|
Capacity
|
300 Ampoules/min |
| |
|
Electrical
Specifications
|
| Line
Voltage |
415 V,
3 Phase, 50 Hz |
| Installed
Power |
3HP |
| |
|
Handling
Range (in
mm)
|
| 9
to 12mm diameter |
| 40
to 60mm height |
|
|
|
|
|
** Note :
Due to continuous product improvement & customer
interaction, designs & specifications may be modified
or upgraded without notice **
|
|
|
|
