|
Constructional
Features
|
| The equipment consists of
two independent cylindrical, vertical
outer vessels mounted on stand made up
of square members |
|
Inside each vessel a
cylindrical basket made up of perforated
sheet is mounted vertically
|
| The basket is
static and the cleaning action is effected
with the help of fluidisation with the
compressed air. |
| A sparger assembly
is provided in each vessel for passing
compressed a |
| An overflow arrangement
Is provided in each vessel to ensure effective
removal generated. |
| Each vessel is provided
with water immersion heaters (SS, 316)
to heat the cleaning agents to a temperature
of about 80 Deg. C. |
| |
|
Automatic
& Process Cycles
|
| We will provide MITSUBISHI
PLC. |
| Valves for over
flaw & drain will be pneumatically
operated rotary actuators & valves
will be electrically actuated solenoid
valves |
| We will provide float switch
for each vessel for level control. |
The system should contain
following three programs:
Program I : Operation of Vessel I
Program 2 : Operation of Vessel 2
Programs: Operation of Vessel I &
Vessel 2 simultaneously.
|
Each Program
should operate as per the following cycle:
DM Water+Soap Solution Wash
DM Water Rinse I
DM Water Rinse II
WFI Rinse. |
| All the sub cycles will
operate on the basis of time. |
| The process parameters should
be settable. |
| Detergent addition will
be manual. |
